| VESTAKEEP 1000 G |
Low viscosity (MVR 150) / Unreinforced, natural / Easy flow for thin walls and encapsulation / UL94 V-0 at 1.6 mm, GWFI 960°C / Food contact |
INJECTION MOULDING |
|
| VESTAKEEP 2000 CF30 |
30% carbon fibre reinforced / Medium viscosity / Very high stiffness and strength (modulus 24 GPa, tensile 251 MPa) / HDT 330°C / UL94 V-0 / Antistatic |
INJECTION MOULDING |
|
| VESTAKEEP 2000 FC30 |
PEEK, carbon fibre reinforced, graphite and PTFE filled / Medium viscosity (MVR 20) / Self-lubricating (bearing bushes, gear parts) / HDT-A 320 C / UL 94 V-0 at 1.6 mm |
Injection Moulding |
|
| VESTAKEEP 2000 G |
Medium viscosity (MVR 70) / Unreinforced, natural / General purpose / Creep and chemical resistant / UL94 V-0, GWFI 960°C / Food contact / For monofilament and encapsulation |
INJECTION MOULDING / EXTRUSION |
|
| VESTAKEEP 2000 G BK |
Black version of 2000 G / Medium viscosity (MVR 70) / Unreinforced / UL94 V-0 / Food contact |
INJECTION MOULDING / EXTRUSION |
|
| VESTAKEEP 2000 GF30 |
30% glass fibre reinforced / Medium viscosity / High stiffness (modulus 11 GPa) / HDT 323°C / Low shrinkage / UL94 V-0 at 1.6 mm, GWFI 960°C |
INJECTION MOULDING |
|
| VESTAKEEP 2500 G High Purity |
Medium viscosity (MVR 35) / Unreinforced, natural / High purity, refined by special filtration / Very low water absorption (0.02%) |
INJECTION MOULDING / EXTRUSION |
|
| VESTAKEEP 3300 G |
Unreinforced PEEK / Medium viscosity (MVR 20) / High heat and chemical resistance / UL 94 V-0 at 3.2 mm (yellow card) / Films and profiles |
Injection Moulding / Extrusion |
|
| VESTAKEEP 3300 G High Purity |
Medium-high viscosity (MVR 20) / High purity, refined by special filtration / Hydrolysis resistant / UL94 V-0, GWFI 960°C / For multifilament, tubes and hoses |
EXTRUSION / INJECTION MOULDING / COMPRESSION MOULDING |
|
| VESTAKEEP 4000 CC20 |
20% ceramic filled / High viscosity (MVR 10) / Higher stiffness and lower thermal expansion than unfilled PEEK / UL94 V-0 at 1.6 mm |
INJECTION MOULDING / EXTRUSION |
|
| VESTAKEEP 4000 CF20 |
20% carbon fibre reinforced / High viscosity / High strength (tensile 200 MPa, modulus 16.9 GPa) / For aerospace and oil and gas |
INJECTION MOULDING |
|
| VESTAKEEP 4000 CF30 |
30% carbon fibre reinforced / High viscosity / Very high stiffness and strength (modulus 23 GPa, tensile 240 MPa) / HDT 325°C / UL94 V-0 at 0.8 mm / Antistatic |
INJECTION MOULDING / EXTRUSION |
|
| VESTAKEEP 4000 CFL30 |
30% carbon fibre reinforced / High viscosity / Modulus 24 GPa, tensile 245 MPa / Shore D 92 / For oil and gas and encapsulation |
INJECTION MOULDING |
|
| VESTAKEEP 4000 FC30 |
PEEK, 30% carbon fibre reinforced, graphite and PTFE filled / Self-lubricating (bearing bushes, gear parts) / Tensile modulus 12500 MPa / HDT-A 310 C / UL 94 V-0 at 0.4 mm (yellow card) |
Injection Moulding |
|
| VESTAKEEP 4000 FP |
Unreinforced PEEK fine powder / High viscosity / Compression moulding and electrostatic coating / UL 94 V-0 at 3.2 mm / Particle size D50 60 micron / Food contact |
Powder Processing (Compression Moulding / Coating) |
|
| VESTAKEEP 4000 G BK |
High viscosity (MVR 10) / Unreinforced, black / UL94 V-0 / Food contact |
INJECTION MOULDING / EXTRUSION |
|
| VESTAKEEP 4000 GF30 |
PEEK, 30% glass fibre reinforced / High viscosity / Tensile modulus 11000 MPa / HDT-A 312 C / UL 94 V-0 at 1.6 mm / GWFI 960 C |
Injection Moulding |
|
| VESTAKEEP 4000 GF30 BK |
30% glass fibre reinforced, black / High viscosity / Low warpage and shrinkage / HDT 312°C / UL94 V-0 at 1.6 mm, GWFI 960°C |
INJECTION MOULDING / EXTRUSION |
|
| VESTAKEEP 4000 P |
Unreinforced PEEK powder / High viscosity / For compounding and scatter coating of composites / UL 94 V-0 at 3.2 mm / Particle size D50 550 micron |
Powder Processing (Compounding / Scatter Coating) |
|
| VESTAKEEP 4500 G |
High viscosity (MVR 9) / Fast crystallisation / Unreinforced, natural / Electrical insulating / Food contact / UL94 V-0 |
INJECTION MOULDING / PROFILE AND SHEET EXTRUSION |
|
| VESTAKEEP 5000 G |
Highest viscosity (MVR 7) / Unreinforced, natural / Highest toughness in range / UL94 V-0, GWFI 960°C / For tubes, hoses and encapsulation |
INJECTION MOULDING / EXTRUSION |
|
| VESTAKEEP 50001XT black |
High viscosity / Cross-linkable by heat treatment after processing / Very high creep resistance and property retention at high temperature / Low friction and wear / Unlubricated / Black |
INJECTION MOULDING / EXTRUSION (LOW MELT TEMPERATURE, SHORT CYCLE) |
|
| VESTAKEEP CW4500 G |
Unreinforced PEEK / High viscosity (MVR 9) / High mechanical, heat and chemical resistance / Self-extinguishing / HDT-A 156 C |
Injection Moulding |
|
| VESTAKEEP L 4000 G |
High viscosity (MVR 12) / Unreinforced, natural / Lubricated for better feeding / UL94 V-0 / Food contact |
INJECTION MOULDING / FILM AND PROFILE EXTRUSION |
|
| VESTAKEEP L 4000 G High Purity |
High viscosity (MVR 12) / Unreinforced, natural / Lubricated for better feeding / High purity, refined by special filtration / UL94 V-0 / Food contact |
INJECTION MOULDING / FILM AND PROFILE EXTRUSION |
|